PS3710A 15” Light Duty Panel Industrial Computer

 

The PS3710A features a clear, concise 15-inch (XGA 1024x768) TFT Touch screen display with an Intel® Pentium® M 1.6GHz processor, creating a powerful system for any production floor. Its aluminium housing adds to the PCs durability, while its multiple I/O ports lend to its flexibility.

The PS3710A is a reliable and enhanced replacement for the 4115T.

FEATURES
Higher Performance
The 1.6 GHz Intel Pentium M CPU with 512 MB or 1 G standard memory drives the fastest and most demanding applications.
Pre-loaded Operating Systems
All PS3710A systems come standard with either Windows 2000 or Windows XP pre-loaded.
Full Complement of I/O Ports
The PS3710A comes standard with an extensive array of I/O ports, including three RS-232 ports, one configurable port, one RAS port, and four USB 2.0 ports available for PS/2 mouse & keyboard, 10/100 Mbps Ethernet port, one VGA port, and audio I/O (input, output, and mic).

The VGA port can be used to connect a VGA monitor. The built-in display and an external monitor can be used simultaneously (both showing the same image).
Cooling Enhancements
The PS3710A uses a Pentium M processor that significantly lowers heat generation (by factor of 4) while providing similar performance to a Pentium 4 processor. Reducing the heat generation prolongs the life of sensitive components such as a hard drive.

When installing a high performance CPU equipped unit into an enclosure, extra care should be exercised to ensure that the ambient air around the unit (inside your enclosure, not outside the enclosure) does not exceed 50± C. Exceeding 50± C may cause premature degeneration of the unit.

Consult your enclosure manufacturer for proper sizing and/or cooling options (if necessary). The product specifications and ratings section of this data sheet contains information your enclosure manufacturer will require.
ADDITIONAL FEATURES

    • 15-inch (XGA) TFT Touch Panel
      Computer
    • Analog resistive touchscreen
    • Intel® Pentium® M 1.6GHz
    • 64 MB Video RAM
    • 40GB Hard Drive
    • Up to 2 GB DRAM (512 MB Standard)
    • Preloaded with either Windows® 2000 operating system or Windows® XP*
    • Side accessible 3.5in MB floppy drive and DVD-ROM drive
    • Type II CompactFlash™ card slot (can accommodate IBM Microdrive™)
    • Four RS-232 ports
    • One configurable RS-232/422/485 port
    • Four USB 2.0 ports
    • 10/100 BaseT Ethernet, 10/100/1000 BaseT Ethernet
    • Audio input/output/mic
    • PS/2 keyboard & mouse ports
    • Mounted with mounting clips or standard 75/100 mm VESA arm
    • 100-240 V AC power supply
    • NEMA 4X/12, IP65 front panel
    • RoHS Directive-conforming
    • 1-year warranty


  • * Important Notice for XP configurations: Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsoft's privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of this computer, or may be completed by Internet or telephone (toll charges may apply).
TECHNICAL SPECIFICATIONS:
Display: 15" LCD colour display, 1024 x 768 (XGA)
Operator Input: Analog resistive touchscreen
Processor: Intel® Pentium® M, 1.6 GHz
Preloaded OS*: Windows® 2000, or Windows® XP
Preloaded HD: 40GB

Accessories available.
SPECIFICATIONS:
Electrical:
AC power: 100-240 V AC,150VA or less, 50/60 Hz
STANDARDS & RATINGS
Front Panel:
NEMA 4/4X/12
COMPLIANCE
- CE (EN 55011, Class A
- CSA - C22.2 No. 142-M1987
- EN 6100-6-2
- IEC 60950-1

FCC (47 CFR, Part 15, Class A)

RoHS

Safety Agency Approvals:
- UL (UL 508) Listed
DIMENSIONS
Display Area: 304.1mm[11.97in.] x 228.1mm[8.98in.]
External Dimensions:
410mm [16.14in] x 309mm [12.17in] x 100mm [3.94in]
Mounting Dimensions (cutout): Compatible with Xycom 4115T
Width: 15.2" (386.1 mm)
Height: 11.2" (284.5 mm)
Mounting Options:
The PS3710A is designed to be mounted directly into an equipment panel without requiring special mounting plates or brackets. It can also be mounted on a wall with the wall-mount adapter included in the mounting kit or it can be mounted on a standard 75/100 mm VESA swing or pendent arm. The PS3710A is not NEMA rated if mounted outside of a panel.
WARRANTY
The PS3710A carries a one-year parts & labour warranty.